General Purpose Enhanced V3
The General Purpose Enhanced Readout has the same full feature set of programmable options and functions as the General Purpose Readout:
Single button operation for Absolute vs Incremental measurements, Data Send, Offsets and built in functions like Upper/Lower Limit and Go/NoGo measurements. It has an external connector for DC power in, Programmable Signal out and External Key input.
The General Purpose E Readout adds a 126 point Non-Linear Error Compensation table and automatic Temperature Compensation for the best accuracy under various operating environments.
The General Purpose Enhanced Readout operates on 1 CR123 Lithium battery or 12-24VDC. SPC (Digimatic) output is standard and it is ready for a ProRF wireless transmitter.
If you are ordering this readout as a replacement for an existing readout, it WILL NOT come pre-programmed with compensation data in place. Your gage will need to be recertified immediately after this readout is installed. If you have questions about this, contact factory before placing your order.
In stock
SKU
700-1600-236
$254.00
Product or Custom Design Question
Replaced by readout #700-1600-246.
The General Purpose Enhanced Readout has the same full feature set of programmable options and functions as the General Purpose Readout:
Single button operation for Absolute vs Incremental measurements, Data Send, Offsets and built in functions like Upper/Lower Limit and Go/NoGo measurements. It has an external connector for DC power in, Programmable Signal out and External Key input.
The General Purpose E Readout adds a 126 point Non-Linear Error Compensation table and automatic Temperature Compensation for the best accuracy under various operating environments.
The General Purpose Enhanced Readout operates on 1 CR123 Lithium battery or 12-24VDC. SPC (Digimatic) output is standard and it is ready for a ProRF wireless transmitter.
Features:
- Battery Operation: 1 CR123 Lithium battery typically lasts up 5-6 months
- DC Operation: 12-24 VDC
- LCD Readout: Low power LCD with Auto Off/On
- Large, easy-to-read: .75 in (20mm) characters
- Displays: decimal inches, fractions, millimeters, or centimeters
- Five Operation Keys: Power, Units, Datum, Plus, Minus
- Six Function Keys: ABS/INC measurements, Data SEND, and 4 special function keys
- ProRF: Wireless Data Transmitter ready
- Easy mounting: from behind or through case.
- Programmable Datum: use Datum key for zero or other value.
- Special Functions: Go/NoGo, Upper/Lower limit, measurement Sum, Min, Max, Ave.
- Scaling: Programmable Linear scaling factor.
- Compensation: Non-Linear and Temperature Compensation
- Lock-Out: Front panel keys and Readout programming
- RoHS compliant: Lead Free Product
- MADE IN USA
Specifications:
| fractions | inch | mm | cm | |
| Display Range | ± 399 63/64 | ± 999.999 | ± 9999.99 | ± 999.999 |
| Resolution | 1/16, 1/32 or 1/64 | .1, .01 or .001 | .1 or .01 | .1, .01 or .001 |
| Repeatability | 1/64 | .001 | .01 | .001 |
| Operating Power | 1 CR123 Battery (or equivalent) or 12-24 VDC | |||
| Output | SPC (Digimatic®) and a programmable open collector signal | |||
| Dimensions | 4.5 x 3.5 x 1.5 in. (115 x 90 x 40 mm) | |||
| Current Part Number | 700-1600-236 | |||
| Current Firmware version | 3.300C | |||
 |
|
|
| Full User Manual | Quick Start Manual | Data Sheet (All Read Outs) |
|
| 2D Drawing |
<h3>ProScale Readout keys Primary Functions</h3>
<p><iframe src="https://www.youtube.com/embed/tyyOU8U-m64" width="560" height="315" frameborder="0" allowfullscreen="allowfullscreen"></iframe></p>
<h3>ProScale Readout keys - Secondary Functions</h3>
<p><iframe src="https://www.youtube.com/embed/DI8zO2fGpwI" width="560" height="315" frameborder="0" allowfullscreen="allowfullscreen"></iframe></p>
 |
 |
| 3D STEP | 3D IGES |
Write Your Own Review
Related Products
Check items to add to the cart or
