XU: Measure Sheets & Tiles

ProTable-XU is a single-axis overhead beam measuring system designed for panel or sheet type products up to 2 inches (50mm) thick and up to 120 lbs (55kg) evenly distributed weight.

In stock
SKU
ProTable XU
$0.00
Product or Custom Design Question

ProTable-XU is a single-axis overhead beam measuring system designed for panel or sheet type products up to 2 inches (50mm) thick and up to 120 lbs (55kg) evenly distributed weight.

The standard tabletop is 3/8" thick hard anodized cast aluminum plate.  (Other customized materials are available.)

The measurement axis is guided by a high precision industial hardened steel linear bearing system.  Fences are ground and plated tool steel.  Contact measurement pins are hardened steel.  With standard contacts, the system can be used to measure length of parts, width of parts, edge-to-hole distances, and for comparison of diagonal meausurements.

The system is free standing and is built with adjustable/leveling feet.  Standard working height is 35 inches. Casters also available.

The Z axis retracts, allowing the measuring contact(s) to move over the product being measured.

Measurement accuracy error not to exceed +/- .003 inches for most versions.


Features:

  • Battery Operation: One CR123 Lithium battery in each Readout (axis) will power a ProTableXU for up to 18 months.
  • Non-Linear error compensation: The ProTable-XU Readout stores up to 126 calibration points along the entire measuring length of each axis.
  • Temperature compensation: The ProScale readout samples ambient temperature every 15 minutes and applies applicable correction to the measurement.
  • SPC Output: Measurement data can be sent wirelessly to a remote PC.
  • Measurement Pins: Standard systems are supplied with hardened steel measuring pins, plus a steel cone (for holes up to 1.5 inches diameter. Custom Hole or Edge probes are also available.
  • Easy Operation: Readout settings for Zero, Plus & Minus Offsets, Data Send, and Measurement Units.
  • Choice of Measurement Units: The Readout will display measurements in inches to .001 or .0005; Millimeters to .01; or Centimeters to .01.
  • One year warranty on all parts against defects in workmanship.
  • RoHS compliant: Lead Free Product
  • Custom designs available for your measuring application
  • MADE IN USA
Product
Information Sheet
Drawing of ProTable-XU system

Video coming soon!

Write Your Own Review
You're reviewing:XU: Measure Sheets & Tiles