ProTable-TUBE is a linear measuring
system for measuring tubes, shafts, and rounds. It is designed for use
on a factory floor, and can be used for measuring wood, plastic, metal,
ceramics, glass, and more.
ProTable-TUBE can be
configured for different size ranges, product diameters, and product
features/geometry. The system is built on a sturdy aluminum plate, with
precision machined parts, a recirculating ball bearing system, and
nickel-plated, ground tool-steel contacts.
ProTables are built using quality aluminum extrusion and
steel bearings to insure smooth operation and to minimize orthogonal,
Abbé, and cosine errors.
Large Character, battery powered Digital
Readout travels with the moving carriage.
Operation: One CR123 Lithium battery in the Readout will power a ProTable for up to 12 months.
Non-Linear error correction: The ProTable Readout stores up to 126
calibration points along the measuring length for non-linear measurement
Temperature compensation: The Readout samples ambient temperature
every 15 minutes and applies applicable correction to the measurement.
Measurement data can be sent wirelessly
to a PC.
Easy Operation: Readout settings for Zero, Plus & Minus
Offsets, Data Send, and Measurement Units.
Choice of Measurement Units:
The Readout will display
measurements in inches to .001 or .0005; Millimeters to .01; or Centimeters to
Custom Design: These systems are built with
your measuring requirements in mind. Our engineers collaborate with you via
e-mail using 3D CAD drawings to ensure your idea is what we build and deliver.*
RoHS compliant: Lead Free Product
LCD Readout Manual
Accuracy: Within +/-0.003 inches over
entire measuring range
Resolution: 0.001 inches, 0.01mm, or
Range: Up to 145 inches length, up to 6
inches diameter, up to 1000 pounds load
Power: 1 size 123 lithium battery.
System has Auto-On and Auto-Off
Maximum slew rate: 60 inches per second
One year warranty on all
parts against defects in workmanship.
Designed and MADE IN USA
Our specialty is Custom Designs to
fit your measurement needs.
We offer no charge collaborative 3D CAD design to produce the measuring system
that is best suited to your application.
* up to 4 hours of design
time provided at no charge.
Additional hours charged at $175 per hour.
All design time charges will be credited toward purchase of the system.
E-Mail a request for a custom design consultation.