systems from fractions to 10 microns....”
ProKit 590 is an
ideal foundation for a 'build-it-yourself" dimensional measuring system.
This system starts
with a ProScale Model 590 measuring system with its 4 friction bearing
sliding carriage assembly. Added to the sliding carriage is an 8
inch x 1 inch (200mm x 25mm) hard anodized jaw and a quick grip handle
to move the entire assembly. This becomes your
moving measuring jaw, or stop.
Beginning in December 2016, all scales will be CLEAR Anodized
instead of Black.
To complete your dimensional
measuring system simply recess the ProKit 590 into a table top, add a
fixed stop at one end and start measuring products. See
Battery Operation: 1 CR123
Lithium battery lasts up to 12 months
LCD Readout: Low power LCD with
easy-to-read: .75 in (20mm) characters
Displays: decimal inches, fractions, millimeters, or centimeters
Units, Datum, Plus, Minus
Six Function Keys: ABS/INC, Data SEND, and 4 special function keys
Programmable Datum: use Datum
key for zero or other value
Special Functions: Go/NoGo, Upper/Lower limit,
Sum, Min, Max, Ave.
Scaling: Programmable Linear
Compensation: Built in Non-Linear and Temperature
Accessories: Pre drilled mounting holes in
sliding carriage assembly
Custom sizes are available to measure up to
16 feet (4.8m)
* System accuracy will ultimately be
influenced by the quality of the measuring system construction (Abbé
Error). When sound mechanical design and assembly have been
incorporated into your design, and the system is calibrated using the
Non-linear Compensation function in the Digital Readout, accuracies stated above will
easily be attainable.